Origin

China

1.Neral

The water well Drilling rig model SPC-600ST (Fig.1) is a truck mounted rig, with all its components  (Including Diesel, gear box, transmission box, rotary table, hoist, dual hydraulic cylinder -feed mechanism of steel cable, mast, mud pump. Etc) are mounted on the “ STEYR ” brand truck (Fig.1). The drilling rig is mainly mechanical driven. Most of the operating mechanism is hydraulic driven and the other part is mechanical driven.

     In addition to the main operating mode of rotary drilling by rotary table and mud. The drilling rig can be adapted other drilling if it is equipped drilling tool that is suitable for drilling through various strata such as clay, sand and matrix etc. At the beginning of boring, pressuring mechanism may be used for drill tool to effect pressuring drilling, thus promoting the efficiency of shallow -hole drilling. With the increased depth, when the weight of the drill tool is greater than the pressure required applying to the drill tool, the main hoisting system should be used to carry out reduced pressure drilling.

   The drilling rig is equipped with a main hoist, a secondary hoist and a tool hoist. The main hoist is used for lifting or lowering of the drill tool, lowering of the well pipe. The secondary hoist is used for driving percussive earth excavator or other coring tool and sand reel to extract sands sample or core and silt in the well. The tool hoist is used for elevating the movable table and other tools to reduce physical labor.           

This instruction describes in detail the drilling rig itself only. The reference should be made to the respective instruction about its mated mud pump and “STEYR” truck.

2.Main characteristics and Applications

This drilling rig features in best maneuver ability, compact construction, high integrity, economical transportation, simple operation, reliable transmission, etc. Other applications as follow:

1. It is equipped with the breakout-gun cylinder. After loosening the first turn of thread of the lock joint with the aid of breakout-gun cylinder, the drill pipe can be rotated in counter-clockwise direction by rotary table to reduce greatly the labor intensity and prolong service life of the component parts.

2. The drilling rig is equipped a mud pump of changing- cylinder for construction.

3. The drilling rig are equipped four jacks to reduce physical labor and improve installation efficiency.

4. To upgrade the versatility in application, standard parts and components.

The drilling rig may be used for drilling in quaternary period stratum and matrix. Main applications are as follows:

(1)  Exploration and investigation of hydro-geological condition.

(2)  Water well drilling for agriculture irrigation, industry and national defense.

(3)  Ventilation of underground tunnel. It can also be used selectively in building engineering.

3. Technical Specifications

1.  Base data

(1) Drilling capacity

(2) Max.through hole diameter of rotary        505mm

(3) Driving Kelly        108×108×10450mm

(4) Mast

Effective height         15m

Rated load of hook    25T

Hoisting system         3×4

(5)  Dimensions (in transportation state)

(L×W×H)          14180×2500×4230mm

(6)Total weight          27T

1.Power

    1 Model              BF6L913C
    2 Type                Air-coolingDiesel engine
    3 Liner               size 102×125mm
    4 Power             141KW/2500r/ min        
    5 Max torque     620N.m/1650r/min   

2.  Main parameters:

(1) Gear box

Output rotation speed                1107 r/min

(2) Sprocket chain box

Input rotation speed                   1107 r/min

Output rotation speed                 964 r/min

(3) Transmission box

Input rotation speed                   1107 r/min

Output rotation speed  (r/min)

(4)Rotary table      Rotation speed and torque

(5)Hoist

(6)Double hydraulic cylinder---cable feed mechanism pressurizing capacity               196000N

Reduce pressure capacity  135000N

Stroke                                   10.6m

(7)Truck chassis:                 STEYR 1491H280/046/6×6N

(8)Pipe breakout cylinder

            Travel                                 185mm

            Liner diameter                    110mm

            Rated torque                      60000 N.M.

(9)   Mud pump   Model:BW1100

(10)Hydraulic oil pump

          Model                                       GPC4-50

          Displacement (cm³/r)             52.5

          Rated pressure (bar)              230

          Input power (kw)                     32.6